Insulated Metal Panels

Artspan Inc. is looking for a select preferred installer network
If you would like to become a Artspan Preferred Installer, fill out the application form. We will review all applications and contact those who meet our criteria.
For more information, call: (204) 331-1800


Summit panels are structural, self-framing panels that can reduce or eliminate the need for additional structural framework in your project. These panels can be used to form the floor, wall and roof systems of your building envelope.
- COVERAGE WIDTH: 36” (1067mm)
- PANEL LENGTHS: 4’ to 52’ (1219mm to 15850mm)
- EXTERIOR FACE: 24ga or 26ga light corrugated pre-painted Grade 33 steel (conforms to ASTM A792), Z275 or AZM150 finish, embossed texture
THICKNESS | 5” |
EFFECTIVE R-VALUE* | 28.5 |
INTERIOR FACE 24ga deep corrugated galvanized G-90 (Z275) pre painted steel
* Thermal testing in accordance with ASTM C518.Standard Exterior Colours
Premium Exterior Colours
Standard Interior Colours
- Custom colours available upon request.
- Minimum order quantities may apply for premium colour selections.
- Colours may not appear exactly as shown – final colour selection should be made from a steel colour sample.
- Colour selection may be subject to availability.
- Colour selection may affect pricing – confirm prior to quoting.

Horizon Wall Panels - Smooth

Horizon Wall Panels - Embossed
Horizon Wall panels are produced with a standard Mesa profiled steel face with a Smooth (SM) or Light Embossed finish (LE). Provides economical panels for industrial and commercial walls with added strength from a double Mesa profile for long panel lengths.
- COVERAGE WIDTH: 42” (1067mm)
- PANEL LENGTHS: 8’ to 52’ (2438mm to 15850mm)
- PROFILE: Mesa
- EXTERIOR FACE: 22ga, 24ga, or 26ga galvanized G-90 (Z275) pre-painted steel
- INTERIOR FACE: 22ga, 24ga, or 26ga galvanized G-90 (Z275) pre-painted steel
- AVAILABLE FINISH: Smooth, Light Emboss
THICKNESS | 2” | 3” | 4” | 5” | 6” |
EFFECTIVE R-VALUE* | 16.67 | 25 | 33.33 | 41.67 | 50 |
INTERIOR FACE 26ga Mesa profile in smooth or light embossed galvanized G-90 (Z275) pre painted steel in Regal White. Other gauge options available.
* Thermal testing in accordance with ASTM C1363 and ASTM C518.Standard Exterior Colours
Premium Exterior Colours
Standard Interior Colours
- Colours may not appear exactly as shown above and may vary slightly.
- Please confirm prior to specifying, estimating or ordering.
- Final colour selection should be made from a steel colour sample.
- Colour selection may be subject to availability.
- Custom colours available upon request.
Series: Edge, Horizon.
Profile: Mesa or Smooth.
Gauge: 26 ga or heavier.
Finished: Embossed or Smooth.
Panel Thickness | Design Criteria | Allowable Loads (PSF) | ||||||
---|---|---|---|---|---|---|---|---|
2’ | 3‘ | 4’ | 5’ | 6’ | 7’ | 8’ | ||
2” Thick | Bending / Shear | 192 | 128 | 96 | 77 | 64 | 49 | 38 |
Deflection (L/240) | 58 | 52 | 48 | 43 | 36 | 29 | 24 | |
Connection | 65 | 44 | 33 | 26 | 22 | 19 | 16 | |
4” Thick | Bending / Shear | 291 | 224 | 168 | 134 | 112 | 96 | 84 |
Deflection (L/240) | 98 | 95 | 92 | 90 | 76 | 63 | 52 | |
Connection | 65 | 44 | 33 | 26 | 22 | 19 | 16 | |
5” Thick | Bending / Shear | 317 | 286 | 215 | 172 | 143 | 123 | 107 |
Deflection (L/240) | 108 | 102 | 96 | 90 | 83 | 70 | 58 | |
Connection | 65 | 44 | 33 | 26 | 22 | 19 | 16 | |
6” Thick | Bending / Shear | 349 | 312 | 248 | 199 | 166 | 142 | 124 |
Deflection (L/240) | 110 | 110 | 109 | 109 | 108 | 92 | 77 | |
Connection | 65 | 44 | 33 | 26 | 22 | 19 | 16 |
TABLE NOTES:
Allowable loads were derived from tests conducted in accordance with ASTM E1592 and ASTM E72.
Allowable loads are calculated with a factor of safety of 2.0 for bending and shear.
Connection strengths reflect a standard fastener pattern – (@) 1/4” – 14 self drilling screw into minimum 14 ga. substrate.
Other substrates must be designed seperately.
Fastener capacity is based on manufacturer pullout / pullover data and are calculated with a safety factor of 3.0.
Allowable loads assume a minimum bearing of 2”.
Thermal Effects were not considered in analysis.
The structural capacity of the supporting members were not considered.
MAXIMUM PANEL LENGTHS BASED ON COLOUR (FT)
Panel Thickness (in.) | Panel Width (in.) | Edge 22ga Wall* Light | Edge 22ga Wall* Medium | Edge 22ga Wall* Dark | Horizon 26ga/26ga Wall Light | Horizon 26ga/26ga Wall Medium | Horizon 26ga/26ga Wall Dark | Skyline 24ga/26ga Roof Light | Skyline 24ga/26ga Roof Medium | Skyline 24ga/26ga Roof Dark |
---|---|---|---|---|---|---|---|---|---|---|
2 | 42 | 25' | 25' | 20' | 38' | 25' | 16' | 47' | 36' | 24' |
3 | 42 | 30' | 30' | 20' | 45' | 35' | 25' | |||
4 | 42 | 30' | 30' | 25' | 50' | 38' | 28' | 52' | 41' | 32' |
5 | 42 | 32' | 30' | 25' | 52' | 41' | 30' | 52' | 44' | 34' |
6 | 42 | 32' | 30' | 25' | 52' | 44' | 32' | 52' | 47' | 36' |
* Smooth or Embossed
Light = Regal White
Medium = Sierra Tan, Parchment, Silver Metallic
Dark = All others
Based on 5' support spacing for walls & 4' support spacing for roofs.

Edge Wall Panels - Smooth

Edge Wall Panels - Light Embossed

Edge Wall Panels - Heavy Embossed
Leading Edge LE wall panels are produced with a standard flat steel face with no profile, offering a clean look to the exterior. These panels are available with the following exterior finishes:
- SMOOTH (SM): Provides flat, smooth face.
- LIGHT EMBOSSED (LE): Provides added subtle visual texture to a flat panel.
- HEAVY EMBOSSED (HE): Provides added visual depth and texture to a flat panel.
Coverage Width: 42” (1067mm)
Panel Lengths: 8’ to 32’ (2438mm to 9754mm) based on colour selection
Profile: Flat
Exterior Face: 22ga galvanized G-90 (Z275) pre-painted steel
Interior Face: 22ga, 24ga, or 26ga galvanized G-90 (Z275) pre-painted steel
Available Finish: Smooth, Light Emboss, Heavy Emboss
THICKNESS | 2” | 3” | 4” | 5” | 6” |
EFFECTIVE R-VALUE* | 16.67 | 25 | 33.33 | 41.67 | 50 |
INTERIOR FACE 26ga Mesa profile in smooth or Light Embossed galvanized G-90 (Z275) pre painted steel in Regal White. Other gauge options available.
* Thermal testing in accordance with ASTM C1363 and ASTM C518.Standard Colours
Premium Colours
- Colours may not appear exactly as shown above and may vary slightly.
- Please confirm prior to specifying, estimating or ordering.
- Final colour selection should be made from a steel colour sample.
- Colour selection may be subject to availability.
- Custom colours available upon request.
Series: Edge, Horizon.
Profile: Mesa or Smooth.
Gauge: 26 ga or heavier.
Finished: Embossed or Smooth.
Panel Thickness | Design Criteria | Allowable Loads (PSF) | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
4’ | 5‘ | 6’ | 7’ | 8’ | 9’ | 10’ | 11‘ | 12‘ | 13‘ | 14‘ | ||
2” Thick | Bending / Shear | 93 | 59 | 41 | 30 | 23 | 18 | 15 | 12 | 10 | ||
Deflection (L/180) | 47 | 41 | 33 | 27 | 22 | 19 | 16 | 14 | 12 | |||
Connection | 42 | 35 | 33 | 26 | 22 | 19 | 16 | 15 | 13 | |||
3” Thick | Bending / Shear | 126 | 101 | 84 | 68 | 52 | 41 | 33 | 27 | 23 | ||
Deflection (L/180) | 94 | 77 | 68 | 58 | 34 | 32 | 29 | 19 | 17 | |||
Connection | 42 | 35 | 33 | 26 | 22 | 19 | 16 | 15 | 13 | |||
4” Thick | Bending / Shear | 168 | 134 | 112 | 84 | 64 | 51 | 41 | 34 | 29 | 24 | 21 |
Deflection (L/180) | 110 | 101 | 92 | 79 | 67 | 57 | 49 | 42 | 37 | 32 | 29 | |
Connection | 42 | 35 | 33 | 26 | 22 | 19 | 16 | 15 | 13 | 12 | 11 | |
5” Thick | Bending / Shear | |||||||||||
Deflection (L/180) | ||||||||||||
Connection | ||||||||||||
6” Thick | Bending / Shear | |||||||||||
Deflection (L/180) | ||||||||||||
Connection |
TABLE NOTES:
Allowable loads were derived from tests conducted in accordance with ASTM E1592 and ASTM E72.
Allowable loads are calculated with a factor of safety of 2.0 for bending and shear.
Connection strengths reflect a standard fastener pattern – (@) 1/4” – 14 self drilling screw into minimum 14 ga. substrate.
Other substrates must be designed seperately.
Fastener capacity is based on manufacturer pullout / pullover data and are calculated with a safety factor of 3.0.
Allowable loads assume a minimum bearing of 2”.
Thermal Effects were not considered in analysis.
The structural capacity of the supporting members were not considered.
MAXIMUM PANEL LENGTHS BASED ON COLOUR (FT):
Panel Thickness (in.) | Panel Width (in.) | Edge 22ga Wall* Light | Edge 22ga Wall* Medium | Edge 22ga Wall* Dark | Horizon 26ga/26ga Wall Light | Horizon 26ga/26ga Wall Medium | Horizon 26ga/26ga Wall Dark | Skyline 24ga/26ga Roof Light | Skyline 24ga/26ga Roof Medium | Skyline 24ga/26ga Roof Dark |
---|---|---|---|---|---|---|---|---|---|---|
2 | 42 | 25' | 25' | 20' | 38' | 25' | 16' | 47' | 36' | 24' |
3 | 42 | 30' | 30' | 20' | 45' | 35' | 25' | |||
4 | 42 | 30' | 30' | 25' | 50' | 38' | 28' | 52' | 41' | 32' |
5 | 42 | 32' | 30' | 25' | 52' | 41' | 30' | 52' | 44' | 34' |
6 | 42 | 32' | 30' | 25' | 52' | 44' | 32' | 52' | 47' | 36' |
* Smooth or Embossed
Light = Regal White
Medium = Sierra Tan, Parchment, Silver Metallic
Dark = All others
Based on 5' support spacing for walls & 4' support spacing for roofs.

Skyline Roof Panels
Skyline Roof panels are produced with a standard Mesa profiled non-embossed smooth steel face. Provides economical roof panels for industrial and commercial projects. 2” Standing seam is mechanically folded and incorporates a hidden fastened clip.
Coverage Width: 42” (1067mm)
Panel Lengths: 10’ to 52’ (3048mm to 15850mm)
Profile: Mesa
Exterior Face: 22ga, 24ga, or 26ga galvanized G-90 (Z275) pre-painted steel
Interior Face: 22ga, 24ga, or 26ga galvanized G-90 (Z275) pre-painted steel
Available Finish: Smooth, Light Emboss (Interior)
THICKNESS | 2” | 3” | 4” | 5” | 6” |
EFFECTIVE R-VALUE* | 16.67 | 25.00 | 33.33 | 41.67 | 50 |
INTERIOR FACE 26ga Mesa profile in smooth or Light Embossed galvanized G-90 (Z275) pre painted steel in Regal White. Other gauge options available.
* Thermal testing in accordance with ASTM C1363 and ASTM C518.Standard Colours
Premium Colours
- Colours may not appear exactly as shown above and may vary slightly.
- Please confirm prior to specifying, estimating or ordering.
- Final colour selection should be made from a steel colour sample.
- Colour selection may be subject to availability.
- Custom colours available upon request.
Series: Skyline.
Profile: Mesa.
Gauge: 26 ga or heavier.
Finished: Smooth.
Panel Thickness | Design Criteria | Allowable Loads (PSF) | ||||||
---|---|---|---|---|---|---|---|---|
2’ | 3‘ | 4’ | 5’ | 6’ | 7’ | 8’ | ||
2” Thick | Bending / Shear | 192 | 128 | 96 | 77 | 64 | 49 | 38 |
Deflection (L/240) | 58 | 52 | 48 | 43 | 36 | 29 | 24 | |
Connection | 65 | 44 | 33 | 26 | 22 | 19 | 16 | |
4” Thick | Bending / Shear | 291 | 224 | 168 | 134 | 112 | 96 | 84 |
Deflection (L/240) | 98 | 95 | 92 | 90 | 76 | 63 | 52 | |
Connection | 65 | 44 | 33 | 26 | 22 | 19 | 16 | |
5” Thick | Bending / Shear | 317 | 286 | 215 | 172 | 143 | 123 | 107 |
Deflection (L/240) | 108 | 102 | 96 | 90 | 83 | 70 | 58 | |
Connection | 65 | 44 | 33 | 26 | 22 | 19 | 16 | |
6” Thick | Bending / Shear | 349 | 312 | 248 | 199 | 166 | 142 | 124 |
Deflection (L/240) | 110 | 110 | 109 | 109 | 108 | 92 | 77 | |
Connection | 65 | 44 | 33 | 26 | 22 | 19 | 16 |
TABLE NOTES:
Allowable loads were derived from tests conducted in accordance with ASTM E1592 and ASTM E72.
Allowable loads are calculated with a factor of safety of 2.0 for bending and shear.
Connection strengths reflect a standard fastener pattern – (@) 1/4” – 14 self drilling screw into minimum 14 ga. substrate.
Other substrates must be designed seperately.
Fastener capacity is based on manufacturer pullout / pullover data and are calculated with a safety factor of 3.0.
Allowable loads assume a minimum bearing of 2”.
Thermal Effects were not considered in analysis.
The structural capacity of the supporting members were not considered.
MAXIMUM PANEL LENGTHS BASED ON COLOUR (FT):
Panel Thickness (in.) | Panel Width (in.) | Edge 22ga Wall* Light | Edge 22ga Wall* Medium | Edge 22ga Wall* Dark | Horizon 26ga/26ga Wall Light | Horizon 26ga/26ga Wall Medium | Horizon 26ga/26ga Wall Dark | Skyline 24ga/26ga Roof Light | Skyline 24ga/26ga Roof Medium | Skyline 24ga/26ga Roof Dark |
---|---|---|---|---|---|---|---|---|---|---|
2 | 42 | 25' | 25' | 20' | 38' | 25' | 16' | 47' | 36' | 24' |
3 | 42 | 30' | 30' | 20' | 45' | 35' | 25' | |||
4 | 42 | 30' | 30' | 25' | 50' | 38' | 28' | 52' | 41' | 32' |
5 | 42 | 32' | 30' | 25' | 52' | 41' | 30' | 52' | 44' | 34' |
6 | 42 | 32' | 30' | 25' | 52' | 44' | 32' | 52' | 47' | 36' |
* Smooth or Embossed
Light = Regal White
Medium = Sierra Tan, Parchment, Silver Metallic
Dark = All others
Based on 5' support spacing for walls & 4' support spacing for roofs.
Panel Dimensions
Panel Features
Weight of aproximately 3.3 lbs/sq.ft. (based of 24ga top and bottom sheets)
5” polyisocyanurate foam core with density of aproximately 2.5 lbs./cu.ft.
Effective R-Value 28.5
Flame Spread Rating (tested in accordance with CAN/ULC S102-10) – 10
Smoke Developed Classification (tested in accordance with CAN/ULC S102-10) – 215
Pre painted galvalume top and bottom steel sheets
Wide selection of colour options available
Patented one piece, continuous corner
Foam-to-foam bond panel joints
Pre finished on exterior and interior sides
High rib profile accommodates mechanical lines
STC Rating (tested in accordance with ASTM E90 standard) – 26
Summit Structural Panels Gallery

Interior Face
- 24 Gauge Deep Corrugated pre-painted, galvanized, or galvalume steel Grade 33
- Deep corrugation contributes to self-framing characteristics of panel system
- Can be left unfinished or drywall and other inferior finishing can be attached directly to the steel face
- Deep corrugation provides chase for electrical and mechanical components

Exterior Face
- 24 or 26 gauge, light corrugated pre-painted Grade 33 steel
- Conforms to ASTM A792, Z275 or AZM150 finish
- Clean, maintenance free exterior finish
- No exposed fasteners or panel joints
- Wide variety of colours available

Pre-Cut, Flat-Packed Packages
- Summit Panels can be used to form the floor, wall and roof pf your project
- Panels can come pre-cut to the required length and pitch
- Packages can include the required fasteners, sealants and hardware required to assemble your building shell
Assembley Drawings
- Each panel is labelled and corresponds with a detailed assembly drawing.
- Stamped engineered structural drawings can be provided
- A detailed assembly guide is provided