Panels

Our panels are built using Artspan’s structural insulated steel panel products. Our structural insulated steel panels are manufactured by encompassing our proprietary polyisocyanurate foam with top and bottom pre-painted galvalume steel sheets. The strength of these steel sheets combined with the characteristics of our foam allow the panel to serve as a structural component of the building envelope.

Artspan Inc. - Panels
Artspan Inc. - Panels - Typical Panel
Typical Panel
Artspan Inc. - Panels - Corner Panel
Corner Panel

Production process

1
Our panels are manufactured in a controlled environment using a continuous panel line.
2
24G pre-painted galvalume top and bottom sheets are roll-formed to the desired profile, width and thickness.
3
Our proprietary polyisocyanurate foam is dispensed between the heated steel sheets, expanding and adhering to the steel while travelling through a temperature-controlled press.
4
The panels are then cut to length using an automated cross cut saw.
5
Additional custom cutting for window/door openings, roof pitch, gable ends, etc. can be completed.
6
Panels are then stacked, cooled, labelled and wrapped in preparation for transport.
Artspan Inc. - Panels - Weight of 3.31 lbs/sq.ft. Weight of 3.31 lbs/sq.ft.
Artspan Inc. - Panels - 5” polyisocyanurate foam core with density of 2.5 lbs./cu.ft 5” polyisocyanurate foam core with density of 2.5 lbs./cu.ft
Artspan Inc. - Panels - R Value (tested by an ASLA certified facility) – 7.13 per inch (effective R-value of 31.3) R Value (tested by an ASLA certified facility) – 7.13 per inch (effective R-value of 31.3)
Artspan Inc. - Panels - Fire Rating (tested in accordance with CAN/ULC S101) – 51 minutes Fire Rating (tested in accordance with CAN/ULC S101) – 51 minutes
Artspan Inc. - Panels - Flame Spread Rating (tested in accordance with CAN/ULC S102-10) – 10 Flame Spread Rating (tested in accordance with CAN/ULC S102-10) – 10
Artspan Inc. - Panels - Smoke Developed Classification (tested in accordance with CAN/ULC S102-10) – 215 Smoke Developed Classification (tested in accordance with CAN/ULC S102-10) – 215
Artspan Inc. - Panels - 24G pre painted galvalume top and bottom sheets available with or without embossing 24G pre painted galvalume top and bottom sheets available with or without embossing
Artspan Inc. - Panels - Wide selection of colour options available Wide selection of colour options available
Artspan Inc. - Panels - Patented one piece, continuous corner Patented one piece, continuous corner
Artspan Inc. - Panels - Foam-to-foam bond panel joints Foam-to-foam bond panel joints
Artspan Inc. - Panels - Pre finished on exterior and interior sides Pre finished on exterior and interior sides
Artspan Inc. - Panels - High rib profile accommodates mechanical lines High rib profile accommodates mechanical lines
Artspan Inc. - Panels - image

AVAILABLE COLOURS

Artspan Inc - panels -WHITE WHITE
WHITE WHITE
QC 8317
Artspan Inc - panels -stone gray
stone gray
QC 8305
Artspan Inc - panels -TAN
TAN
QC 8315
Artspan Inc - panels -charcoal
charcoal
QC 8306
Artspan Inc - panels -black
black
QC 8262
Artspan Inc - panels -regent gray
regent gray
QC 8730
Artspan Inc - panels -dark red
dark red
QC 8250
Artspan Inc - panels -melcher's green
melcher's green
QC 8307
Artspan Inc - panels -slate blue
slate blue
QC 8260
Artspan Inc - panels -dark brown
dark brown
QC 8229
Artspan Inc - panels -bright white
bright white
QC 8783
Artspan Inc - panels -bone white
bone white
QC 8273
Artspan Inc - panels -tile red
tile red
QC 8259
Artspan Inc - panels -medium green
medium green
QC 8329
Artspan Inc - panels -royal blue
royal blue
QC 8790

NOTES

  1.  Colours may not appear exactly as shown above and may vary slightly.
  2. Please confirm prior to either Specifying, Estimating, or Ordering.
  3. Final colour selection should be made from a steel colour sample.
  4. Colour selection may be subject to availability.
  5. Custom colours available upon request.